QT400 is suitable for a wide range of small to medium-sized butterfly and ball valves, with 50 – 380 Nm operating torque. The QT400 is available with Digital, Analog, and CAN bus interfaces.

QT400 supports dual CAN and failsafe features intended to support IMO/SOLAS requirements for safe return to port (SRtP) and emergency shut down.


Min-max torque50 Nm – 380 Nm
Min-max closing time 0-100% / 0-90 20 sec – 37 sec
Valve spindle adapterSQ22, 38 mm depht
Valve flangeF07 & F10 
Valve applicationsButterfly or ball valves with the quarter-turn operation.
Example butterfly valves: DN80-DN300.


Weight12 kg
Dimensions H/W/D229/156/209 mm
Enclosure protectionIP68 (10 m 72 hr) – Corrosion protected aluminum enclosure
Operating conditions-25 to +55°C
Temperature protectionMotor current is switched off in case of over-heating. Stator coils are utilized as heating elements in case of low temperatures.

In addition to the standard version, Eltorque offers specialized versions of the QT400 for use either on Open deck or in EX classified zones. These actuators are technically similar to the Standard version but are upgraded with key features to secure durability in tough conditions. An overview is listed below;


Operating conditions-25 to +70°C
Designed for use on open deck and outdoor. Should not be exposed to corrosive chemicals.
QT400 EX2.4
Operating conditions

-25°C to +70°C
Should not be exposed to corrosive chemicals.

CertificationsIECEx – Certificate of conformity
EX protection

1. Temperature call T4-maximum surface temperature 135°C in given ambient temperature
2. Gas group IIC
3. Equipment protection level Gb-zone 1


A new coating standard makes the actuator able to handle extreme conditions, better than ever before.
For this application, we use the Norsok M-501 System 6 standard.  The coating makes optimal protection of the installation with a minimum need for maintenance, the coating system is also maintenance and application friendly. This coating also ensures that health, safety, and environmental impacts are evaluated and documented.

We have added new material selection for the interface box, which increases the tensile strength. The alloy (A356) makes the interface box more resistant to corrosion. This makes it handle extreme weather and conditions better than before.